Native Instruments MASCHINE MK3 User Manual

AMPLITUDE ENVELOPE
The AMPLITUDE ENVELOPE section allows you to tailor your Sample in terms of its loudness
over time.
The Type selector.
The Type selector allows you to choose from three different types of amplitude envelopes. De-
pending on the selected type, the available parameters in the AMPLITUDE ENVELOPE section
will differ (see table below):
▪ One-shot: This is typical vintage drum machine behavior: the sample is played in its entire-
ty from beginning to end with no envelope. If One-shot is selected, the AMPLITUDE ENVE-
LOPE section doesn’t display any parameters.
▪ AHD: AHD mode disables the Sustain and Release controls of the ADSR envelope (see be-
low), and replaces them with the Hold parameter. AHD mode is ideal for “fire and forget”
behavior, whereby you would like to have the sound trigger for a certain amount of time re-
gardless of how long you hold the pad down.
Working with Plug-ins
The Sampler Plug-in
MASCHINE - Manual - 304

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs