Native Instruments MASCHINE MK3 User Manual

Pattern Editor with the Audio Plug-in Loop mode loaded on Sound 4.
By default the Audio plug-in will playback in Loop mode, meaning the audio will be repeated
for the duration of the Pattern regardless of the length of the audio. If you want to chop the
loop and pitch it, switch to Gate mode. For more information on Gate mode, refer the following
section ↑7.2, Using Loop Mode.
If you are using audio with the Sampler plug-in and decide you want to use it with the
Audio plug-in, you can quickly switch from one plug-in to another using the controller.
This functionality can be handy if attempting to load a loop which does not have the
Loops tag as these files will load into the Sampler if they are missing the Loops tag. For
more information on selecting plug-ins, refer to the section ↑6.1.3.1, Browser Plug-in
Slot Selection.
Using the Audio Plug-in
Loading a Loop into the Audio Plug-in
MASCHINE - Manual - 331

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs