Native Instruments MASCHINE MK3 User Manual

All Drumsynths share the same parameter organization in the Control area.
▪ Their parameters are grouped into the same three Parameter pages:
◦ The Main page groups the most important parameters for each drum type. Here you
can select the engine to be used, the tuning, the decay, etc.
◦ The Advanced page provides access to more complex and finer adjustments to the
drum sounds.
◦ The Modulation page allows to adjust the playability of the drum by setting its velocity
response.
▪ The Main page always starts with a MAIN section. The other sections on the page differ with
each Drumsynth and engine.
Common Layout in the Plug-in Strip (Mix View)
In Mix view, the Plug-in panels of all Drumsynths have a similar layout in the Plug-in Strip:
Using the Drumsynths
Drumsynths – General Handling
MASCHINE - Manual - 337

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs