Native Instruments MASCHINE MK3 User Manual

Element Description
Decay Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Tension Adjusts the tension of the drum skin, measured as a percentage,
allowing for a longer and bigger pitch bend. Available values range
from 0.0 to 100.0 % (default).
Impact Adjusts how hard the drum is hit, measured as a percentage.
Available values range from 0.0 % (softest) to 100.0 % (hardest).
The default value is 80.0 %.
Flex Adjusts the elasticity of the skin, measured as a percentage,
allowing for a greater pitch bend when the drum is hit. Available
values range from 0.0 to 100.0 % (default: 30.0 %).
MUTE Section
Skin Adjusts the amount of damping applied to the drum skin, measured
as a percentage. Available values range from 0.0 % (default) to
100.0 %.
Air Adjusts the amount of damping applied to the air, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
50.0 %).
Advanced Page
For this engine the Advanced page does not contain any parameters.
Modulation Page
As with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-
ity.
Using the Drumsynths
The Toms
MASCHINE - Manual - 399

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs