Native Instruments MASCHINE MK3 User Manual

◦ The Main page groups the most important parameters. Here you can adjust the Shape
of the oscillator waveform, the filter Cutoff and Resonance, the envelope modulation
(Mod. Amt.) and envelope Decay amounts, the Drive amount and the Glide Time.
◦ The Advanced page provides access to the Glide on/off parameter.
Common Layout in the Plug-in Strip (Mix View)
In Mix view, the Plug-in panel of the Bass Synth in the Plug-in Strip provides easy access to
parameters and visualization of the oscillator waveform:
The Bass Synth layout in the Plug-in Strip.
▪ In the top row of the panel are the envelope Mod. Amt. (modulation amount) and Decay
parameters, followed by the main Shape (oscillator waveform), the Octave range, and the
Drive parameters.
▪ In the bottom row of the panel you find the filter Cutoff, Resonance and Glide Time param-
eters.
For more information on the various Plug-in panels found in the Plug-in Strip, please re-
fer to section ↑12.4, The Plug-in Strip.
Using the Bass Synth
Bass Synth – General Handling
MASCHINE - Manual - 421

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs