Native Instruments MASCHINE MK3 User Manual

2. Open the extended view of the Mixer by clicking the down-pointing arrow on the left of the
Mixer:
Navigate to the channel of which you want to configure the output: for a Sound click the
header of its parent Group (or double-click it if the Mixer currently displays the Group
channel strips), and for a Group simply ensure that its channel strip is visible (double-
click the Group header if the Mixer currently displays the Sound channel strips).
3. To adjust the level, panoramic position or Cue state of a channel, use the channel’s fader,
balance control (above the fader) or headphone button (below the fader), respectively.
This is equivalent to setting the Level, Pan, and Cue parameters described above, respec-
tively.
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE - Manual - 543

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs