Native Instruments MASCHINE MK3 User Manual

1. Click the headphone icon in the strip’s header to show the controls for the Cue channel.
2. To adjust the level and panoramic position of the Cue output, use the channel’s fader and
balance control (above the fader), respectively.
This is equivalent to setting the Level or Pan parameters in the CUE section, respectively
(see above).
3. To select another destination for the Cue output, click the first area under the level meter
and select the desired destination in the menu.
This is equivalent to setting the Output parameter in the MAIN section (see above).
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE - Manual - 553

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs