3.
▪ This opens the following dialog:
▪ Click Scene Enabled from the dialog.
4. In the submenu that opens, select the source you want to use for changing the MIDI Pro-
gram Change messages. A list of connected controller names appear in the drop-down
menu, or you can select None to disable the feature.
5. Then from the drop-down menu select MIDI Note to trigger your Scenes via MIDI notes, or
Program Change to trigger your Scenes via MIDI Program Change messages.
6. If necessary, reopen the same submenu and select the MIDI channel the Scene changes
should receive MIDI messages from (channel 1 by default).
Audio Routing, Remote Control, and Macro Controls
Using MIDI Control and Host Automation
MASCHINE - Manual - 568
To Next Page
Loading...
