Native Instruments MASCHINE MK3 User Manual

A MIDI CC assignment for the current Parameter page.
A few host automation assignments for the current Parameter page.
The following paragraphs describe in more details how to assign MIDI controls and host auto-
mation IDs to MASCHINE parameters.
Which MASCHINE Parameters Are Automatable?
All the automatable parameters are found in Plug-ins or Channel properties (e.g., you cannot
automate the Pattern Length or the color of a Scene). In the software in Mix view, this means
that all automatable parameters are found in some Parameter page of the Control area.
In order to be automatable, parameters of Plug-ins and Channel properties have to meet one
single requirement:
▪ In order to be automatable, a parameter must be controlled by a knob or a button in the soft-
ware — most parameters controlled by selectors (e.g., for selecting an operating mode or a
filter type) cannot be automated.
Almost all parameters meeting this requirement are automatable, the only exceptions being:
Audio Routing, Remote Control, and Macro Controls
Using MIDI Control and Host Automation
MASCHINE - Manual - 572

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs