Native Instruments MASCHINE MK3 User Manual

2. On the left of the Assignment area, click the Automation tab to show the Automation
pane, then in this pane click the Host tab.
3. Click the Enable label in the Assignment field under any unassigned parameter to auto-
matically assign that parameter to the next free automation ID.
→ The Assignment field displays the automation ID for that parameter. The parameter is
ready to be controlled from your host.
Removing an automation ID is also straightforward:
► Click the non-empty Assignment field under any assigned parameter to remove the auto-
mation ID currently assigned to that parameter.
Audio Routing, Remote Control, and Macro Controls
Using MIDI Control and Host Automation
MASCHINE - Manual - 574

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs