Native Instruments MASCHINE MK3 User Manual

(4) AMP ENVELOPE section: Allows you to adjust the Type parameter and the envelope parame-
ters from the Pitch/Envelope page in the Control area. For more details, see section ↑6.2.2,
Page 2: Pitch / Envelope.
(5) SATURATION, LO FI, and FILTER sections: Allows you to adjust the parameters from the FX/
Filter page in the Control area. For more details, see section ↑6.2.3, Page 3: FX / Filter.
(6) TUNE section: Allows you to adjust the Tune parameter from the Pitch/Envelope page in the
Control area. For more details, see section ↑6.2.2, Page 2: Pitch / Envelope.
(7) PLAY and LOOP sections: Allow you to adjust the play range and loop settings of the selected
zone, respectively. These provide the same parameters as the PLAY RANGE and LOOP sections
found in the Zone page of the Sample Editor. For more details, see section ↑16, Sampling and
Sample Mapping.
Sampler – ZONE Pane
1
4
2
3
Controlling Your Mix
The Plug-in Strip
MASCHINE - Manual - 616

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs