Native Instruments MASCHINE MK3 User Manual

Main Page
The Gate in the Control area: Main page.
Parameter Description
DEPTH Section
Threshold This value determines the threshold at which the Gate starts to
work. Higher values will let only the loudest parts of the signal
through the Gate.
TIME Section
Attack Use Attack to adjust how fast the Gate reacts to the incoming
signal: the more you dial it to the right, the slower it will react,
resulting in a softer transition between the gated and the not
gated parts of the signal.
Hold The Hold parameter is used to determine how long the gated
signal is held; lower values will result in a more "choppy" effect.
Release The time the Gate will take to release the input signal after it
rises above the threshold.
OUTPUT Section
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
Effect Reference
Dynamics
MASCHINE - Manual - 665

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs