The Plate Reverb effect in the Plug-in Strip.
The Plate Reverb in the Control area.
Parameter Description
MAIN Section
Mode Allows you to choose one of three basic modes of Reverb: Room,
Hall, and Plate (default: Room).
Decay Adjusts the damping of the plate, which directly affects the
decay time of the reverb.
EQ Section
Low Shelf Controls the low-frequency content in the reverberated signal.
High Damp Adjusts the damping of the high frequencies in the reverberated
signal.
Effect Reference
Spatial and Reverb Effects
MASCHINE - Manual - 708
To Next Page
Loading...
