Native Instruments MASCHINE MK3 User Manual

The Beat Delay panel in the Plug-in Strip.
Main Page
The Beat Delay in the Control area: Main page.
Parameter Description
DELAY Section
Time The Time parameter defines the delay length in note values. The
available values depend on the unit defined by the Unit
parameter on the Unit page (see below). They range from half a
unit to 16 units.
Offset This parameter is used to shift the start of the delay in relation
to the tempo.
Feedback Adjusts the amount of output signal fed back into the input.
Higher values produce more copies of the signal and longer
decays.
Effect Reference
Delays
MASCHINE - Manual - 710

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs