Native Instruments MASCHINE MK3 User Manual

Main Page
Parameter Description
MODE
Mode Select an effect.
TOUCHSTRIP
Engage Activates the effect.
Frequency Controls the volume of the comb filter.
FLANGER
Decay Controls the decay time.
SATURATION Controls the saturation in the feedback path, producing a
dirtier, compressed sound.
STEREO Controls the stereo spread of the effect.
Setup Page
Parameter
Description
COLOR
Polarity Flips the phase of the signal in the feedback loop. Negative
polarity lowers the pitch by an octave and produces a slightly
hollower sound.
Tone Offers the choice between Flanger mode, essentially a
straightforward comb filter or short delay, and Phaser mode,
which shifts the phase of the signal in the feedback loop to
produce a more rounded, hollow tone.
Effect Reference
Perform FX
MASCHINE - Manual - 732

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs