Native Instruments MASCHINE MK3 User Manual

Main Page
Parameter Description
MODE
Mode Select an effect.
TOUCHSTRIP
Engage Activates the effect.
Frequency Controls the frequency of the filters in the filter bank, altering
the tonality of the signal.
ECHO
Time Sets the delay time.
Feedback Sets the delay feedback.
Pump Controls the amount of compression applied to the feedback
loop.
Wet Level Controls the volume of the delayed signal.
Mix Mode Sets the routing of the signal:
- In Mix mode, the dry signal is passed unprocessed and the
wet signal is added on top according to the Wet Level
parameter.
- In Insert mode, the dry signal is processed with a filter and
the wet signal is added on top. The Wet Level parameter is an
output level control for the whole effect while engaged.
- In Wet Only mode, the dry signal is muted entirely, which is
useful for placing the effect on a send.
Effect Reference
Perform FX
MASCHINE - Manual - 737

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs