Native Instruments MASCHINE MK3 User Manual

Ring Perform FX in the Control area.
Main Page
Parameter Description
MODE
Mode Select an effect.
TOUCHSTRIP
Engage Activates the effect.
Frequency Controls the frequency of the ring modulators.
OSC
Spread Controls the frequency spread of the ring modulators. At low
Spread values, the ring modulators converge to a single
modulation frequency. At higher Spread values, the oscillator
frequencies become further apart.
Glide Sets the smoothing rate of the control position, allowing for
pitch slides as you activate different values.
REVERB
Rev Time Controls the decay time of the plate reverb.
Rev Mix Controls the dry/wet mix of the plate reverb.
MIX
Dry/Wet Controls the dry/wet mix of the overall effect.
Effect Reference
Perform FX
MASCHINE - Manual - 739

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs