Setting Description
Input Click Inputs to display the Routing Inputs. Here you can select
which inputs on your audio interface should be used for the four
stereo inputs of MASCHINE. Select the inputs of your audio
interface on the right column by clicking the fields: you will be
presented with a drop-down menu with all the available Inputs.
The choices made here will determine which inputs can be used
when sampling external sources, for example.
Output Click Output to display the Routing Outputs. Here you are
presented with a list of the 16 stereo outputs from MASCHINE:
In the right column, you can assign them to the outputs of your
audio interface. Click the fields in the right column to select the
desired outputs via a drop-down menu.
Adjusting Audio Preferences Using the Controller
You can access the Audio preferences directly from the controller. The options found here are
a replica of those found in the software.
To access the Audio preferences using the controller:
1. Press SETTINGS to display the Settings page.
2. Press Button 2 (AUDIO) to access the audio settings.
3. Press the Page buttons to access the different pages: Interface (page 1), Input Routings
(page 2), Output Routings 1–4 (page 3), Output Routings 5–8 (page 4), Output Routings
9 –12 (page 5), Output Routings 13 –16 (page 6).
→ The selected page is displayed, and Knobs 1–8 will dynamically change to represent the
parameters.
Page 1: Interface
Interface settings for the selected Audio device are configured on page 1 of the Audio prefer-
ences.
To configure the Interface settings for the selected audio interface:
► Use the page buttons to select page 1: Interface.
Basic Concepts
Preferences
MASCHINE - Manual - 74
To Next Page
Need help?
General
