Native Instruments MASCHINE MK3 User Manual

Main Page
Parameter Description
MODE
Mode Select an effect.
TOUCHSTRIP
Engage Controls a hard bypass. Activating the control commences
looping, releasing the control bypasses the effect.
Length Can be assigned to Length (loop length, by default) or Pitch
(relative pitch) using TS Assign.
TS Assign Assigns the control to Length or Pitch.
STUTTER
Gate Applies a volume envelope to the loop, exaggerating the
"stutter" effect, especially at short loop lengths. Setting the
parameter to 100% effectively disables the envelope whereas
the gating is most extreme at 0%.
Pitch Parameter controls playback pitch (relative to pitch when the
effect is engaged) when the controls are assigned to Length,
and the Length parameter controls loop length when the
control is assigned to Pitch. Otherwise each of these
parameters has no effect and is respectively hidden.
LOOP
Direction Controls the looping direction—Forward (always forward),
Reverse (always reverse) or Both. In Both mode, direction is
forwards by default on engage and whenever the most recent
control movement was upwards, or reverse whenever the most
recent control movement was downwards. The Direction
parameter is available only when the TS Assign is set to
Length.
Effect Reference
Perform FX
MASCHINE - Manual - 742

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs