Native Instruments MASCHINE MK3 User Manual

Main Page
Parameter Description
MODE
Mode Select an effect.
TOUCHSTRIP
Engage Enables and disables the effect.
Position Controls the tremolo and vibrato rate and depth, within the
ranges defined by the Min and Max parameters on the second
page.
TREMOLO
Trem/Vibr Controls the balance between tremolo (modulation of
amplitude) and vibrato (modulation of frequency/pitch).
Vibr Mode Sets the vibrato mode. Two are available: Varispeed, which
modulates the playback speed of the audio, much like moving
the pitch control on a turntable or tape player, and Freq Shift,
which uses a modulated frequency shifter. Freq Shift
produces a somewhat detuned sound due to the nature of the
frequency shifting—low frequencies are more audibly shifted
than high frequencies. Varispeed scales pitches evenly across
the audible range, but it introduces small fluctuations in
timing.
Attk/Rel Controls the speed at which the effect comes on after turning
the effect on and tails off after releasing the effect.
Stereo Controls the stereo width of the modulation.
Effect Reference
Perform FX
MASCHINE - Manual - 745

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs