Native Instruments MASCHINE MK3 User Manual

1. Right-click ([Ctrl]-click on macOS) the name of the desired Scene in the Arranger or in
the Scene Manager, and select Color from the context menu.
A Color Palette appears. In the Palette, the current color of the Scene is highlighted.
2. Select the desired color in the Palette. You can also choose to set the Scene back to its
default color by selecting Default at the bottom of the Color Palette.
→ The Scene slot takes the new color you select.
By default, Scenes are white. But you can choose another default color for Scenes in
Preferences > Colors > Scene Default. See section ↑2.6.8, Preferences – Colors Page for
more information.
Once you have set a custom color for a Scene as described above, the Scene will retain
its color when you move it in the Arranger view, and the color will be stored with the
Scene when you save your Project. Note that you can select the same color as the one
used by default: In this case the color (even unchanged) will be considered as a custom
color and will follow the Scene as you move it.
Working with the Arranger
Using Ideas View
MASCHINE - Manual - 775

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs