Use the Section Manager to manage your Sections.
▪ On the left you can see the list of the 16 Section slots in the selected Section bank. Slots
containing a Section show a colored or white bar on the left along with the Section name.
The other slots contain no Section. The selected Section is highlighted (Intro A in the im-
age above).
▪ On the right you can see the various Section banks in form of pad grids — a pad grid is a
square of 4x4 cells representing the pads of your controller. In each Section bank the col-
ored cells indicate Section slots containing a Section, while unlit cells indicate empty Sec-
tion slots. The selected Section bank is surrounded by a white border (bank 2 in the pic-
ture above). If there are too many Section banks to fit into the Section Manager’s height,
use the scroll wheel of your mouse to display the other banks.
▪ The Section slots on the left and the cells in the selected pad grid on the right are strictly
equivalent: you can use either the slots or the corresponding cells to execute all the man-
agement commands described in the next sections.
Closing the Section Manager
► To close the Section Manager, click anywhere outside it.
Section Manager vs. Arranger’s Top Row
If all Section operations can be done in the Section Manager, most of them can also be done
in the top row of the Arranger:
Working with the Arranger
Using Arranger View
MASCHINE - Manual - 777
To Next Page
Loading...
Need help?
General
