To enable or disable Section/Scene MIDI Change feature, do the following:
1. In the MASCHINE Header, click the cog wheel icon.
2. Click MIDI Change from the menu.
→ The MIDI Change dialog appears.
In the MIDI Change dialog:
1. In Scene option click the Enabled checkbox to enable Scenes in the Ideas view to be trig-
gered. In Section option, click the Enabled checkbox to enable Sections in the Arranger
view to be triggered.
2. In the Source submenu, select the name of your controller.
3. In the Trigger submenu for Scene and Section, select MIDI Note to trigger via MIDI notes,
Program Change to trigger via MIDI Program Change messages, or None (default setting)
to disable MIDI Change completely.
Working with the Arranger
Triggering Sections or Scenes via MIDI
MASCHINE - Manual - 806
To Next Page
Loading...
