EasyManuals Logo

Native Instruments MASCHINE MK3 User Manual

Native Instruments MASCHINE MK3
918 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #813 background imageLoading...
Page #813 background image
Click the INPUT selector to choose between the available inputs:
If SOURCE is set to Ext. Ster., you can select either of MASCHINE’s four external stereo
inputs In 14.
If SOURCE is set to Ext. Mono, you can select either of MASCHINE’s eight external mono
inputs: the left (“L”) or right (“R”) channel of each input pair In 14.
If SOURCE is set to Internal, you can select the output of any available Group or the Mas-
ter.
You can easily record the output of a particular Sound by setting SOURCE to Internal,
soloing this Sound and selecting its parent Group in the INPUT selector!
You can also set SOURCE to Internal, choose as INPUT a Group with a drum kit loaded,
and record your live improvisations on the pads while playing this drum kit! You will
then have your own improvisations recorded as Samples, ready to be used, edited,
sliced, etc., as any other Samples in MASCHINE!
Choosing a Recording Mode
Click the MODE selector to select from the two available recording modes:
Sync: If Sync is selected, you can synchronize the recording function to the sequencer, so
that the recording starts in sync with the sequencer after you clicked Start. The recording
will start at the top of the next bar. The LENGTH control on the right allows you to choose
a length for the Sample to be recorded: either 1, 2, 4, 8, or 16 bars or choose Free if
you don’t want to set any duration limit to the recording. At any time you can click Stop to
stop the recording before the duration defined by LENGTH has been reached — the record-
ing will then stop at the next bar.
Detect: If Detect is selected, you can set a certain threshold using the THRESHOLD control
on the right. After you clicked Start, the input signal level exceeding this threshold will
start the recording. You can then manually stop the recording by clicking Stop. This is use-
ful to record a singer or an instrumentalist, for example. You can also adjust the threshold
by dragging the slider that appears on the horizontal input level meters above the RECORD-
ING section:
Sampling and Sample Mapping
Recording a Sample
MASCHINE - Manual - 813

Table of Contents

Other manuals for Native Instruments MASCHINE MK3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Native Instruments MASCHINE MK3 and is the answer not in the manual?

Native Instruments MASCHINE MK3 Specifications

General IconGeneral
Encoders8 touch-sensitive knobs
Audio Interface24-bit / 96 kHz
MIDI I/O1 x MIDI In, 1 x MIDI Out
USBUSB 2.0
Pads16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display2 full-color screens
Outputs1/4" TRS Line Outputs, Stereo Headphone Output
SoftwareMaschine Software
Power SupplyUSB bus-powered
Dimensions320 x 301 x 41 mm
Weight2.2 kg
System RequirementsIntel Core i5, 4 GB RAM
Inputs1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs

Related product manuals