Native Instruments MASCHINE MK3 User Manual

Parameter Description
BPM (BPM Mode) Selects how the tempo is defined: If you select AUTO, MASCHINE
will calculate the tempo automatically. If you select MANUAL, you
can enter the tempo in BPM manually.
ADJUST If BPM is set to AUTO, you can choose between the tempo that
MASCHINE detected, or half or double of that tempo. If BPM is set
to MANUAL, you can adjust the tempo manually.
When MODE is set to DETECT, a second section of parameters is available at the bottom of the
left display: the ENGINE section.
► When MODE is set to DETECT, press the Right Page button to show the ENGINE section.
The ENGINE section.
This ENGINE section contains a single parameter: ZERO-X.
Parameter Description
ENGINE Section (Detect mode only)
ZERO-X (Zero
Crossing, Detect mode
only)
When MODE is set to DETECT, activate ZERO-X to force the detected
Slices to be created on the closest locations where the audio signal
crosses the zero value. This can be helpful to avoid clicks when
playing back Slices in another sequence.
Sampling and Sample Mapping
Slicing a Sample
MASCHINE - Manual - 844

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs