Page / Parameter Description
pattern. When Mono is selected and the slices are applied to a
Group, the sampler polyphony is automatically set to 1 so only one
voice will play at a time. The Choke Group is also automatically set to
1 so each new pad that is hit will always take priority over the
previous one by cancelling it out. This behavior can be found on
vintage drum machines (typically used to “choke” the open hi-hat
with the closed one), but also in monophonic synthesizers that are
only capable of playing one note at a time.
PATTERN This will create a new pattern or replace the existing once the slices
have been applied.
BPM Available when Create or Replace is selected in the PATTERN
parameter. Selects how the tempo is defined: If you select Auto,
MASCHINE will calculate the tempo automatically. If you select
Manual, you can enter the tempo in BPM manually.
ADJUST Available when Create or Replace is selected in the PATTERN
parameter. If BPM is set to Auto, you can choose between the tempo
that MASCHINE detected, or half or double of that tempo. If BPM is
set to Manual, you can adjust the tempo manually.
Button 5, 6, 7 and 8
SPLIT (Button 5) Splits the sample in half, or adds a Slice during sample playback.
REMOVE (Button 6) Removes the start border of the selected Slice, thereby joining this
Slice with the previous Slice.
DELETE ALL
(Button 7)
Removes all Slices.
APPLY… (Button 8) Applies the Slices.
Sampling and Sample Mapping
Slicing a Sample
MASCHINE - Manual - 852
To Next Page
Loading...
Need help?
General
