3. In that menu selects Delete to remove the focused Zone only, or Delete Selected to re-
move all selected Zones.
Moving Zones in the List
You can move your Zones across the Zone List via drag and drop:
1. Select the Zone(s) you want to move.
2. Click and hold the mouse button, and drag your mouse vertically.
As the mouse pointer moves, an insertion line appears at various places between the ex-
isting entries.
3. When the insertion line indicates the desired location, release the mouse button to drop
the selected Zone(s) to this new place.
Moving Zones allow you to reorder the Zone List. This can come in handy before you run
the Map as Drum Kit command from the Sample Map’s context menu, so that your Sam-
ples are well ordered in the new mapping. See section ↑16.5.4, Selecting and Editing
Zones in the Map View for more information on the Sample Map.
Selecting and Managing Zones on Your Controller
You can select and remove Zones on your controller.
Selecting a Zone
► On the ZONE page of Sampling mode, press Button 7 (PREVIOUS) or 8 (NEXT) to set the
focus to the previous or next Zone in the Zone List, respectively.
→ The waveform of the Sample in this focused Zone appears on the right display, and the
Zone settings appear at the bottom of the left display.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE - Manual - 866
To Next Page
Loading...
Need help?
General
