Firewall Protection
176
ProSecure Unified Threat Management (UTM) Appliance
 To edit a port-triggering rule:
1. In the Port Triggering Rules table, click the Edit table button to the right of the
port-triggering rule that you want to edit. The Edit Port Triggering Rule screen displays.
2. Modify the settings that you wish to change (see the previous table).
3. Click Apply to save your changes. The modified port-triggering rule is displayed in the Port
Triggering Rules table.
 To remove one or more port-triggering rules from the table:
1. Select the check box to the left of each port-triggering rule that you want to delete, or
click the Select All table button to select all rules.
2. Click the Delete table button.
 To display the status of the port-triggering rules:
Click the Status option arrow in the upper right of the Port Triggering screen. A pop-up
screen displays, showing the status of the port-triggering rules.
Figure 102.
To Next Page
Loading...
Need help?
General