NETGEAR UTM5 User Manual

Wireless Module for the UTM9S
555
ProSecure Unified Threat Management (UTM) Appliance
3. Specify the settings as explained in the following table:
Table 145. Edit Profile screen settings
Field Description
Profile Configuration
Profile Name The name for the wireless security profile is UTM9S. You cannot change this
name.
SSID The wireless network name (SSID) for the wireless security profile. There is
no default SSID name.
Broadcast SSID Select the check box to enable the wireless access point to broadcast its
SSID, allowing wireless clients that have a null (blank) SSID to adopt the
wireless access point’s SSID. To prevent the SSID from being broadcast,
clear the check box.
Security
Note: Before you configure security, you might want to read Wireless Data
Security Options on page 549.
Specify the wireless security by making a selection from the drop-down list:
• OPEN. This is the default setting. An open system has no authentication
and no encryption, and therefore no security configuration. However, you
can use an open system with encryption. To do so, select WEP from the
Security drop-down list. In the WEP Index and Keys section of the
screen, take the following steps:
- Select Open System authentication.
- Select the encryption.
- Enter a passphrase and generate a key, or enter a key manually.
• WEP. To configure WEP, take the following steps in the WEP Index and
Keys section of the screen:
- Select Shared Key authentication.
- Select the encryption.
- Enter a passphrase and generate a key, or enter a key manually.
• WPA. To configure WPA, select the encryption and authentication. The
remaining configuration depends on the selected authentication:
- For WPA-PSK, select a password.
- For WPA with RADIUS, configure the RADIUS server settings.
- For WPA with PSK+RADIUS, select a password and configure the
RADIUS server settings.
• WPA2. To configure WPA2, select the encryption and authentication. The
remaining configuration depends on the selected authentication:
- For WPA2-PSK, select a password.
- For WPA2 with RADIUS, configure the RADIUS server settings. As an
option, you can enable RADIUS preauthentication.
- For WPA2 with PSK+RADIUS, select a password and configure the
RADIUS server settings. As an option, you can enable RADIUS
preauthentication.

NETGEAR UTM5 Specifications

General

Brand	NETGEAR
Model	UTM5
Category	Firewall
Language	English