127
– Printing: Secure Print
MC361/MC561/CX2731 MFP Advanced User’s Guide
4 Select the "Job Options" tab.
5 Select "Secure Print" under "Job Type".
6 Enter a job name in the "Job Name" box and a password in the
"Job Password" box.
- If you select the "Request Job Name for each print job" check
box, a prompt for the job name appears when you send the
print job to the MFP.
7 Click "OK".
8 Configure other settings if necessary and then start printing.
- The print job is sent to the MFP, but is not printed.
9 Press the <PRINT> key on the MFP control panel.
10 Press the down arrow key to select [Print Job], then press <OK>.
11 Press the down arrow key to select [Stored Job], then press
<OK>.
12 Enter your password in the [Password] box, then press <OK>.
- Press the <CLEAR> key if you enter a wrong number.
Press the <STOP> key if you want to stop the job search.
13 Make sure [Print] is selected, then press <OK>.
- If you select [Delete], you can cancel the print job.
14 Enter the number of copies, then press <OK>.
Note
• If you forget the password for a job and do not print the job, the
job will remain in the SD memory.
• To delete a job stored on the SD card, use the Configuration Tool
utility.
To Next Page
Loading...
