Oki CX2731MFP User Manual

284 – Issues: Fax Issues
MC361/MC561/CX2731 MFP Advanced User’s Guide
Unable to Send a Fax
Symptom Point to check Remedy
Unable to send a
fax.
Did you perform the
correct procedure?
Check the appropriate
procedure and try again.
Did you specify the
correct number?
If you use speed dial, print the
speed dial list and check the
entry.
Did you specify the
appropriate
command line?
Specify the appropriate
command line for your region.
Is it due to the
recipient MFP?
Contact the recipient and ask
him to check the MFP status.
The MFP does
not continuously
scan a
document.
Did you load the
document correctly
on the ADF?
Keep the leading edges of the
pages in the document even.
Did you load a
document other
than A4, letter or
legal 13/13.5/14 on
the ADF?
Only A4, letter, and legal 13/
13.5/14 size documents can be
sent from the ADF.
The MFP does
not send a fax
even though you
dialed the
number and
pressed <Mono
Start>.
Did you specify the
appropriate
command line?
Specify the appropriate
command line for your region.
Did you load the
document correctly?
Load the document correctly.
Did you dial the
correct number?
Dial the correct number.
Is the recipient’s
line busy?
Wait until the line is open and
try again.
Unable to
transmit a fax
manually.
Did you put down
the handset before
pressing <Mono
Start>?
Press <Mono Start> first and
then put down the handset.
The MFP does
not start
scanning (during
memory
transmission).
Did you load the
document correctly?
Load the document correctly.
Is there enough
memory?
Check the available memory.

Oki CX2731MFP Specifications

General

Brand	Oki
Model	CX2731MFP
Category	All in One Printer
Language	English