40
– Faxing: Fcode Transmission
MC361/MC561/CX2731 MFP Advanced User’s Guide
10 Specify a destination.
11 Press the <Mono Start> key.
Note
• When you want to change the specified time of a reservation,
cancel the reservation and make another one.
• You can make reservations for other fax jobs while the MFP is
transmitting.
• For details on how to cancel a fax job, see the Basic User’s Guide
on the DVD supplied with your MFP.
Fcode Transmission ___________
Fcode transmission uses sub addresses for communication in
accordance with the standard of ITU-T. By creating and registering
Fcode boxes, you can perform confidential communication and
bulletin board communication.
You can register up to 20 Fcode boxes.
When registering an Fcode box, be sure to register a sub address,
that is used to identify the Fcode box.
Fcode Confidential Communication
When an Fcode confidential box is set in the recipient fax MFP, you
can perform confidential communication by specifying the sub
address of the box.
Received data cannot be printed unless the specified PIN number is
entered.
Fcode Bulletin Board Communication
When an Fcode bulletin box is set in the recipient MFP, you can
transmit to and remove data from a bulletin box by specifying its sub
address.
To Next Page
Loading...
Need help?
General
