146
– Job Macros (MC561 and CX2731 MFP Only): The <JOB MAC-
RO> Key
The <JOB MACRO> Key ________
To create a macro, press the <JOB MACRO> key (1) on the control
panel to open the job macro menu.
Important!
If the user authentication is enabled, log into the MFP before
following the procedures below.
Creating a Macro _____________
1 Specify the settings you want to register at the control panel.
2 Press the <JOB MACRO> key to open the job macro menu.
3 Press the down arrow key to select an entry number for the new
macro, then press <OK>.
4 Press the down arrow key to select [Register], then press <OK>.
5 Review the settings using the down arrow key to scroll through
them, then press <OK>.
6 Enter a title for the new macro.
7 Use the arrow keys to highlight Done], then press <OK>.
8 Press the let or right arrow keys to select [Yes] on the
confirmation screen.
Using Macros ________________
1 Press the <JOB MACRO> key to open the job macro menu.
To Next Page
Loading...
