32
– Faxing: Sender Name (TTI)
MC361/MC561/CX2731 MFP Advanced User’s Guide
3 Press the down arrow key to select [Advanced Functions], then
press <OK>.
4 Press the down arrow key to select [Sender Name Select], then
press <OK>.
5 Press the down arrow key to select a sender name, then press
<OK>.
6 Press the left arrow key to go back to the fax standby screen.
Changing the Standard Sender Name
(TTI)
If you use a sender name frequently, we recommend that you specify
it as the standard sender name.
Note
In the initial fax settings described in the Setup Guide, you
specify [Sender ID]. By default, this value is used as the
standard sender name.
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [User Install], then press
<OK>.
6 Press the down arrow key to select [Standard TTI], then press
<OK>.
7 Press the down arrow key to select the name you want to use,
then press <OK>.
8 Press the left arrow to go back to the start screen.
To Next Page
Loading...
Need help?
General
