26
– Copying: Incompatible Settings
MC361/MC561/CX2731 MFP Advanced User’s Guide
12 Check that the following settings are displayed on the start
screen:
[Mixed Size]: ON
[Paper Feed]Auto
[Zoom]: 100%
[Scan Size]: Legal 14
13 Use the numeric keypad to enter the number of copies.
14 Press the Mono Start or Color Start key.
Incompatible Settings _________
Some functions cannot be used in combination with other functions.
For example, when you have specified [Margin], you cannot specify
[N-in-1] and [Repeat].
If you try to select incompatible functions, a message explaining the
problem appears on the display.
If you get such a message, you must disable the incompatible
functions and then try again.
Disabling an Incompatible Function
To disable incompatible functions, return the function’s setting to the
default.
1 Press the <COPY> key.
2 Press the right arrow key to enter the [Change settings] menu.
3 Press the down arrow key to select the function you want to
disable, then press <OK>.
4 Press the down arrow key to select the default value, then press
<OK>.
5 Press the left arrow key repetitively to back out to the copy
standby screen.
Note
For the default value of each function, see “Admin Setup” on
page 171.
To Next Page
Loading...
Need help?
General
