77
– Scanning: Drivers and Software
MC361/MC561/CX2731 MFP Advanced User’s Guide
Drivers and Software __________
You can use scanner drivers and software when scanning documents.
They allow you to scan documents and change settings easily from
your computer.
Using the TWAIN Driver: Windows
The explanations in this section use the MC561 and PaperPort as an
example.
Important!
• Install the PaperPort before using this function.
• For details on how to start a scan job, see the Basic User’s
Guide on the DVD supplied with your MFP.
• For details on how to install software, refer to “Installing
Utilities” on P. 212.
Starting a Scan Job (for Windows)
Note
The procedure below uses PaperPort, Model MC561 and Scan To
Remote PC with USB connections as an example.
For network instructions, or details on how to start a scan job,
see the Basic User’s Guide on the DVD supplied with the MFP.
1 Place your document with text face up in the ADF or face down
on the document glass.
2 Press the <Scan> key.
3 Press the down arrow key to select [Remote PC], then press
<OK>.
4 Start PaperPort on your computer.
5 Click [Select], then select [TWAIN: OKI MC561].
A window appears.
To Next Page
Loading...
Need help?
General
