283
– Issues: Fax Issues
MC361/MC561/CX2731 MFP Advanced User’s Guide
Trouble after Starting to Copy
Fax Issues __________________
Note
If the following information does not solve the trouble, call your
local service dealer.
Symptom Point to check Remedy
The MFP is slow
to start
copying.
Is [Warming Up] or
[Preparing] displayed
on the display screen?
The MFP is preparing.
wait until it starts copying.
A copy job is
cancelled.
Is any error occurring? A copy job is cancelled when
specific errors occur while
copying.
Clear the error and start the
copy job again.
Is there paper on the
MP tray?
When copying using paper
from the MP tray, check if
enough paper is loaded on
the MP tray before starting
to copy.
And, press the <SETTING>
key and select [Paper Setup]
> [Select Tray] > [Copy] >
[MP tray], and then check
that [ON] or [ON(Prior)] is
selected.
To Next Page
Loading...
Need help?
General
