51
– Faxing: Security Functions
MC361/MC561/CX2731 MFP Advanced User’s Guide
9 Use the left arrow key to go back to the main screen.
Using Broadcast Destination
1 Place your document with text face up in the ADF or face down
on the document glass.
2 Press the <FAX> key.
3 Make sure that [Fax] is selected and press <OK> to open the fax
standby screen.
4 Specify all the destinations.
5 Press the <Mono Start> key.
A fax number confirmation screen appears. If you need to
remove any of the numbers, press <OK> to select the one you
wish to delete, then press the right arrow key. Select [Delete
from Destination], then press <OK>.
6 Press the <Mono Start> key to start transmission.
Note
• If the destination number entered with the ten-key pad is
wrong, delete it and re-specify the correct one.
• When many destinations are specified, you may not be able to
check all of them at one time. Press the down arrow key to scroll
down to check all the destinations.
Press Dial Twice (Confirm Dial)
This function requires you to verify any number entered using the
numeric keypad by re-entering it. The fax is sent only if the two
numbers match.
To Next Page
Loading...
Need help?
General
