52
– Faxing: Security Functions
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
• This function is unavailable when you specify the destination
using speed dial.
• If you use symbols in the destination number, you must re-enter
the symbols as well.
• This function is performed first when [Check broadcast dest.] is
also enabled.
• This function is unavailable when you transmit faxes manually.
Configuring Confirm Dial
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Fax Setup], then press
<OK>.
6 Press the down arrow key to select [Security Function], then
press <OK>.
7 Press the down arrow key to select [Confirm Dial], then press
<OK>.
8 Press the down arrow key to select [ON], then press <OK>.
9 Use the left arrow key to go back to the main screen.
Using Confirm Dial
1 Place your document with text face up in the ADF or face down
on the document glass.
2 Press the <FAX> key.
3 Enter a destination number using the numeric keypad.
To Next Page
Loading...
Need help?
General
