37
– Faxing: Transmission Functions
MC361/MC561/CX2731 MFP Advanced User’s Guide
6 Place the document face up on the ADF or face down on the
document glass.
7 Specify a destination.
8 Press the <Mono Start> key.
Manual Transmission
You can transmit faxes manually when the recipient uses manual
reception mode or when you want to send a fax after talking on the
phone.
Important!
• You can scan only a single page when using the document
glass for manual transmission.
• You need to connect an external telephone to the MFP to
send faxes manually.
• The following functions are unavailable in manual
transmission:
-broadcast
- transmission at the specified time
- Fcode transmission
- ID check transmission
- check broadcast destinations
-confirm dial
Note
Although manual transmission is a kind of real time
transmission, you do not have to disable memory transmission,
as described above, before performing the following procedure.
1 Pick up the handset.
2 Dial a number.
To Next Page
Loading...
Need help?
General
