233
– Adjusting Color: Color Correct Utility
MC361/MC561/CX2731 MFP Advanced User’s Guide
16 To save the setting on the PPD file selected at step 3, click
[Save].
17 Enter the administrator’s name and password.
18 Click “Quit”.
19 Click “OK”.
20 Under “System Preferences” select “Print & Fax” to delete and re-
register all printers for which adjustments were made.
Changing Gamma Value or Hue
You can adjust the tone by adjusting the gamma value, and the
output color by adjusting the hue.
For Windows
1 Click “Start > “All Programs” > “Okidata” > “Color Correct Utility”
> “Color Correct Utility”.
2 Select “Hue & Saturation Tuning” and click “Next”.
3 Select the MFP, then click “Next”.
4 Select the standard mode, then click “Next”.
5 Apply settings as necessary by adjusting the slide bar.
Note
If you select the “Use printer’s unadjusted color” check box,
100% of each color is used for printing, and the hue slide bar is
fixed.
6 Click “Test Print”.
7 Check the print result.
To Next Page
Loading...
Need help?
General
