234
– Adjusting Color: Color Correct Utility
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
If you are not satisfied with the result, repeat steps 5 and 6.
8 Click “Next”.
9 Enter a name and click “Save”.
10 Click “OK”.
11 Click “Finish”.
For Macintosh OS X
1 Launch the Color Correct Utility].
2 Select the MFP, then click “Select PPD file”.
3 Select a PPD file for the MFP and click “Open”.
4 Click “Next”.
5 Click “Gamma/Hue/Saturation Tuning”.
6 Select the standard mode, then click “Next”.
7 Apply settings if necessary by adjusting the slide bar.
Note
If you enter check “Use default printer hue”, 100% of each color
is used for printing, and the hue slide bar is fixed.
8 Click “Print Test”.
9 Check the print result.
To Next Page
Loading...
