150
– MFP Menu: Change Menu Settings
MC361/MC561/CX2731 MFP Advanced User’s Guide
Change Menu Settings _________
To change menu settings, an administrator password is necessary.
The default password is “aaaaaa”.
Admin Setup
For on-going changes to the MFP settings.
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select the setup menu on which you
want to change a setting, then press <OK>.
6 Specify the setting, then press <OK>.
7 Repeat steps 5 and 6 to make any additional changes.
8 Use the left arrow key to go back to the main menu.
Easy Setup
Easy Setup is used when first setting up the MFP.
1 Press the <SETTING> key.
2 Press the down arrow key to select [Easy Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select the setup menu on which you
want to change a setting, then press <OK>.
6 Specify the setting, then press <OK>.
7 Repeat steps 5 and 6 to make any additional changes.
8 Use the left arrow key to go back to the main menu.
To Next Page
Loading...
Need help?
General
