241
– Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Issues
This chapter provides solutions to the problems you may encounter
while operating your MFP.
Error Messages ______________
This section explains the causes and remedies for the error messages
displayed on the display screen and the function of the <STATUS>
key.
Note
In the following tables,
• “%COLOR%” indicates C (cyan), M (magenta), Y (yellow) or K
(black).
• “%TRAY%” indicates tray 1, tray 2 (optional) or the MP tray.
• “%ERRCODE%” indicates an error code.
If the displayed message includes “Please see Help for details”,
you can check countermeasures for the error by pressing the
<?HELP> key on the control panel.
General Error Messages
Code Message
<STATUS>
key
Cause/Remedy
Inspection is
required
PU Flash Error
Blinks Firmware error occurred.
Call your local service dealer.
Inspection is
required
PU
Communication
Error
Blinks Firmware error occurred.
Call your local service dealer.
To Next Page
Loading...
Need help?
General
