147
– Job Macros (MC561 and CX2731 MFP Only): Editing a Macro Ti-
tle
2 Press the down arrow key to scroll down to the macro you want
to use, then press <OK>.
3 Make sure [Restore] is selected, then press <OK>.
4 Check the settings, then press <OK>.
Note
Press the down arrow key to scroll the setting list on the screen.
5 Press the left or right arrow key to select [Yes] on the
confirmation message.
Note
If the access control is enabled on the functions you want to use,
a message appears indicating that you are not permitted to use
them and the screen returns to the confirmation message. Select
[No] to return to the job macro menu.
6 Start a job.
Editing a Macro Title __________
1 Press the <JOB MACRO> key to open the job macro menu.
2 Use the down arrow key to select the macro whose title you want
to edit, then press <OK>.
3 Use the down arrow key to select [Title Edit], then press <OK>.
4 Review the settings using the down arrow key to scroll through
them, then press <OK>.
5 Enter a new title.
6 Use the arrow keys to select [Enter], then press <OK>.
To Next Page
Loading...
