66
– Scanning: Scan to E-mail
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
The default password is “aaaaaa”.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Use the down arrow key to select [Scanner Setup], then press
<OK>.
6 Use the down arrow key to select [E-mail Setup], then press
<OK>.
7 Use the down arrow key to select [From/Reply to], then press
<OK>.
8 Use the down arrow key to select [From] or [Reply to], then
press <OK>.
a) If you select [From]:
- Enter e-mail addresses.
- Use the arrow keys to select [Enter], then press <OK>.
b) If you select [Reply to]:
- Select a method to enter a destination.
- Specify a destination.
9 Use the left arrow key to go back to the main screen.
Creating Templates
You can record up to five templates with various subject lines and
body text.
Registering a Subject
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password (the default password is
“aaaaaa”).
4 Use the arrow keys to select [Enter], then press <OK>.
To Next Page
Loading...
Need help?
General
