82
– Scanning: Drivers and Software
MC361/MC561/CX2731 MFP Advanced User’s Guide
Advanced Mode
You can adjust in detail how a document is scanned.
1 Follow the procedure for "Starting a Scan Job (for Mac OS X)" on
page 43 through step 8.
2 Select “Advanced” under “Mode”.
3 Change the settings if necessary.
4 Click “Scan” to start scanning.
5 If you want to finish the setting, click “Quit”.
Using WIA Driver: Windows Only
To use the WIA driver, the MFP must be connected to the computer
via the USB port. It doe not work with networks.
Note
• The WIA driver does not support Mac OS X.
• WIA 2.0: supports Windows 7/ Windows Server 2008 R2.
• WIA 1.0: supports Windows Vista/ Windows Server 2008/
Windows XP/ Windows Server 2003.
Starting a Scan Job
Note
The explanations in this section use the MC561 and PaperPort as
an example.
1 Place your document with text face up in the ADF or face down
on the document glass.
2 Press the <SCAN> key.
To Next Page
Loading...
