83
– Scanning: Drivers and Software
MC361/MC561/CX2731 MFP Advanced User’s Guide
3 Press the down arrow key to select [Remote PC], then press
<OK>.
4 Start PaperPort on your computer.
5 Click “Select” and then click “WIA:MC361/561”.
6 Click “Scan”.
7 Select a paper feeding method.
8 Select a document type.
9 Specify the area to be scanned.
10 Click “Scan”.
11 When scanning is complete, click “Finish”.
The scanned image displays in PaperPort.
Using Windows FAX and Scan: Windows 7 Only
1 Place your document with text face up in the ADF or face down
on the document glass.
2 Press the <SCAN> key.
3 Press the down arrow key to select [Remote PC], then press
<OK>.
4 On your computer, click “Start” > “All programs” > “Windows FAX
and Scan”.
5 Click “New Scan”.
6 Select “MC361/561” and click OK”.
To Next Page
Loading...
