41
– Faxing: Fcode Transmission
MC361/MC561/CX2731 MFP Advanced User’s Guide
Registering Fcode Boxes
To perform Fcode communication, register an Fcode box. Be sure to
register a sub address and a PIN number for each Fcode box.
Note
• Maximum number of characters is as follows:
- Box Name: A maximum of 16 characters.
- Sub-Address: A maximum of 20 digits including # and *.
- ID Code: 4 digits.
• For details on how to enter text, see the Basic User’s Guide on
the DVD supplied with your MFP.
Registering an Fcode Box for Confidential
Communication
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Fax Setup], then press
<OK>.
6 Press the down arrow key to select [Fcode Box], then press
<OK>.
7 Press the down arrow key to select a box number, then press
<OK>.
8 Make sure that [Register/Edit] is selected, then press <OK>.
9 Make sure that [Confidential Box] is selected, then press <OK>.
10 Make sure that [Box Name] is selected, then press the right
arrow key.
11 Enter a box name.
To Next Page
Loading...
Need help?
General
