24
– Copying: Copy Different Length Documents
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
• The position of the margin is related to the [Direction] setting
for the document.
- If [Direction] is set to [Portrait], the short edges are located
at the top and bottom and long edges are located to the right
and left.
- If [Direction] is set to [Landscape], the short edges are
located to the right and left and the long edges are located at
the top and bottom.
• When you use the document glass, the continuous scan mode is
automatically enabled. Follow the instructions which appear on
the display.
• [Margin] is disabled when all the values are set to [0].
Copy Different Length Documents
When you use the ADF, you can copy multiple documents having the
same width but two different lengths at the same time onto their
respective paper sizes.
Usable for the following length combinations:
• Letter and Legal-14
or
• Letter and Legal 13.5
The default paper size must be set to letter.
To Next Page
Loading...
Need help?
General
